User Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Safety Instruction
- Chapter 1 Product Introduction
- Chapter 2 Start up Device
- Chapter 3 Basic Operation
- Chapter 4 Network
- Chapter 5 Live View and Configuration
- Chapter 6 Mobile Device Features
- Chapter 7 Camera Management
- Chapter 8 Driving Behavior Analysis
- Chapter 9 Smart Configuration
- Chapter 10 Events and Alarms
- Chapter 11 Security
- Chapter 12 Maintenance
- 12.1 View System Information
- 12.2 Search Log File
- 12.3 Upgrade System
- 12.4 Configure Image Partition
- 12.5 Configure Overwritten Recording
- 12.6 Print Log
- 12.7 Enable IP Camera Plug and Play
- 12.8 Reboot
- 12.9 Restore Default Settings
- 12.10 Export Configuration File
- 12.11 Import Configuration File
- 12.12 Synchronize Time
- 12.13 Configure DST
- 12.14 Configure Local Output
- 12.15 Configure RS-232
- 12.16 Detect HDD
- 12.17 Configure Analog Camera
- Chapter 13 Local Menu Operation
- Appendix A. Communication Matrix and Device Command
12.5 Congure Overwrien Recording
You can enable overwrien recording if you want to overwrite the former record les when the
storage media is full. Or disable overwrien record if you want to stop recording when the storage
media is full.
Steps
1. Go to
Conguraon → Storage → Advanced Sengs .
2.
Check or uncheck Enable Overwring according to your needs.
3. Click Save.
12.6 Print Log
If you need to debug the device, you can enable prinng log.
Steps
1. Go to
Conguraon → Storage → Advanced Sengs .
2. Check Enable Print Log.
3. Click Save.
12.7 Enable IP Camera Plug and Play
You can enable the plug-and-play funcon of the connected IP camera to use the camera directly
aer it is connected without installing the drive.
Steps
1. Go to Conguraon → Storage → Advanced Sengs .
2. Check IPC plug and play.
3. Click Save.
12.8 Reboot
Reboot your recorder via menu instead of disconnecng power from the recorder.
Go to Conguraon → System → Maintenance → Upgrade & Maintenance . Click Reboot and
click OK in popup message box to start
reboong.
12.9 Restore Default
Sengs
When the device is abnormal caused by the incorrect set parameters, you can restore the
parameters.
Mobile Video Recorder User Manual
60