User Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Safety Instruction
- Chapter 1 Product Introduction
- Chapter 2 Start up Device
- Chapter 3 Basic Operation
- Chapter 4 Network
- Chapter 5 Live View and Configuration
- Chapter 6 Mobile Device Features
- Chapter 7 Camera Management
- Chapter 8 Driving Behavior Analysis
- Chapter 9 Smart Configuration
- Chapter 10 Events and Alarms
- Chapter 11 Security
- Chapter 12 Maintenance
- 12.1 View System Information
- 12.2 Search Log File
- 12.3 Upgrade System
- 12.4 Configure Image Partition
- 12.5 Configure Overwritten Recording
- 12.6 Print Log
- 12.7 Enable IP Camera Plug and Play
- 12.8 Reboot
- 12.9 Restore Default Settings
- 12.10 Export Configuration File
- 12.11 Import Configuration File
- 12.12 Synchronize Time
- 12.13 Configure DST
- 12.14 Configure Local Output
- 12.15 Configure RS-232
- 12.16 Detect HDD
- 12.17 Configure Analog Camera
- Chapter 13 Local Menu Operation
- Appendix A. Communication Matrix and Device Command
Safety Instrucon
Regulatory Informaon
This is a class A product and may cause radio interference in which case the user may be required
to take adequate measures.
Laws and Regulaons
Use of the product must be in strict compliance with the local laws and regulaons. Please shut
down the device in prohibited area.
Power Supply
• Use of the product must be in strict compliance with the local electrical safety regulaons.
• Use the power adapter provided by qualied manufacturer. Refer to the product specicaon for
detailed power requirements.
• It is recommended to provide independent power adapter for each device as adapter overload
may cause
over-heang or a re hazard.
• Make sure that the power has been disconnected before you wire, install, or disassemble the
device in the authorized way according to the
descripon in the manual.
• To avoid electric shock, DO NOT directly touch exposed contacts and components once the
device is powered up.
• DO NOT use damaged power supply devices (e.g., cable, power adapter, etc.) to avoid electric
shock,
re hazard, and explosion.
• DO NOT directly cut the power supply to shut down the device. Please shut down the device
normally and then unplug the power cord to avoid data loss.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
• Make sure the power supply has been disconnected if the power adapter is idle.
• Connect to earth before
connecng to the power supply.
Transportaon, Use, and Storage
• To avoid heat accumulaon, good venlaon is required for a proper operang environment.
• Store the device in dry, well-venlated, corrosive-gas-free, no direct sunlight, and no heang
source environment.
• Avoid re, water, and explosive environment when using the device.
• Install the device in such a way that lightning strikes can be avoided. Provide a surge suppressor
at the inlet opening of the equipment under special
condions such as the mountain top, iron
tower, and forest.
• Keep the device away from
magnec interference.
• Avoid device installaon on vibratory surfaces or places. Failure to comply with this may cause
device damage.
• DO NOT touch the heat
dissipaon component to avoid burns.
Mobile Video Recorder User Manual
vi