User Manual

6.
Oponal: Click Copy to and select desired channel(s) to copy the above sengs to other alarm
output(s).
7. Click Save.
10.6 Congure Excepon Alarm
Congure alarms which are triggered by excepons to take necessary acons in me.
Steps
1. Go to
Conguraon → Event → Basic Event → Excepon .
2. Select Excepon Type.
3. Congure linkage method. For detailed steps, refer to "Congure Linkage Acons".
4. Click Save.
10.7
Congure Arming Schedule
Steps
1. Drag in me line to draw an arming period.
2. Adjust the set arming period.
-
Click a period and adjust its length.
-
Click a period, enter start
me and end me, and click Save.
-
Click Delete All to delete all periods.
Note
Up to 8 me periods can be set for each day and each of the me periods cannot be
overlapped.
3. Oponal: Click Copy to and select desired days to copy the above sengs to other days.
4. Click Save.
10.8
Congure Linkage Acons
Check the linkage acon(s) when events occur, and click Save.
Note
Linkage acons vary with event types.
Audible Warning
The device will trigger an audible beep when events occur.
Nofy Surveillance Center
The device will send an excepon or alarm signal to the remote alarm host when events occur.
The alarm host refers to the computer installed with the remote client.
Mobile Video Recorder User Manual
55