User Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Safety Instruction
- Chapter 1 Product Introduction
- Chapter 2 Start up Device
- Chapter 3 Basic Operation
- Chapter 4 Network
- Chapter 5 Live View and Configuration
- Chapter 6 Mobile Device Features
- Chapter 7 Camera Management
- Chapter 8 Driving Behavior Analysis
- Chapter 9 Smart Configuration
- Chapter 10 Events and Alarms
- Chapter 11 Security
- Chapter 12 Maintenance
- 12.1 View System Information
- 12.2 Search Log File
- 12.3 Upgrade System
- 12.4 Configure Image Partition
- 12.5 Configure Overwritten Recording
- 12.6 Print Log
- 12.7 Enable IP Camera Plug and Play
- 12.8 Reboot
- 12.9 Restore Default Settings
- 12.10 Export Configuration File
- 12.11 Import Configuration File
- 12.12 Synchronize Time
- 12.13 Configure DST
- 12.14 Configure Local Output
- 12.15 Configure RS-232
- 12.16 Detect HDD
- 12.17 Configure Analog Camera
- Chapter 13 Local Menu Operation
- Appendix A. Communication Matrix and Device Command
5.
Congure arming schedule. For detailed steps, refer to "Congure Arming Schedule".
6. Congure linkage method. For detailed steps, refer to "Congure Linkage Acons".
7.
Oponal: Click Copy to and select desired channel(s) to copy the above sengs to other alarm
input(s).
8. Click Save.
10.5 Congure Alarm Output
If you want the recorder to link with the alarm output device to alarm when events occur, set
alarm output.
Before You Start
Connect an alarm device to your recorder via the alarm output cables.
Steps
1. Go to
Conguraon → Event → Basic Event → Alarm Output .
Figure 10-2 Congure Alarm Output
2. Select Alarm Output No. and enter Alarm Name.
3. Select Delay to set dwell
me.
Alarm output will connue for the set me.
4. Congure arming schedule. For detailed steps, refer to "Congure Arming Schedule".
5. Oponal: Click Manual Alarm to trigger alarm manually. Click Stop Alarm to stop manual alarm.
Mobile Video Recorder User Manual
54