User Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Safety Instruction
- Chapter 1 Product Introduction
- Chapter 2 Start up Device
- Chapter 3 Basic Operation
- Chapter 4 Network
- Chapter 5 Live View and Configuration
- Chapter 6 Mobile Device Features
- Chapter 7 Camera Management
- Chapter 8 Driving Behavior Analysis
- Chapter 9 Smart Configuration
- Chapter 10 Events and Alarms
- Chapter 11 Security
- Chapter 12 Maintenance
- 12.1 View System Information
- 12.2 Search Log File
- 12.3 Upgrade System
- 12.4 Configure Image Partition
- 12.5 Configure Overwritten Recording
- 12.6 Print Log
- 12.7 Enable IP Camera Plug and Play
- 12.8 Reboot
- 12.9 Restore Default Settings
- 12.10 Export Configuration File
- 12.11 Import Configuration File
- 12.12 Synchronize Time
- 12.13 Configure DST
- 12.14 Configure Local Output
- 12.15 Configure RS-232
- 12.16 Detect HDD
- 12.17 Configure Analog Camera
- Chapter 13 Local Menu Operation
- Appendix A. Communication Matrix and Device Command
4. Draw the video tampering area.
1) Click Draw Area.
2) In live view image, drag to draw the video tampering area.
3) Click Stop Drawing.
5. Set
Sensivity.
6.
Congure arming schedule. For detailed steps, refer to "Congure Arming Schedule".
7. Congure linkage method. For detailed steps, refer to "Congure Linkage Acons".
8. Click Save.
10.4 Congure Alarm Input
If you want the recorder to connect to peripheral alarm input devices to realize linkage alarm, set
alarm input.
Before You Start
Connect an alarm device to your recorder via the alarm input cables.
Steps
1. Go to
Conguraon → Event → Basic Event → Alarm Input .
Figure 10-1 Congure Alarm Input
2. Select Alarm Input No. and enter Alarm Name.
3. Select Alarm Type according to alarm device type.
4. Check Enable Alarm Input Handling.
Mobile Video Recorder User Manual
53