User Manual

Chapter 10 Events and Alarms
10.1 Congure Moon Detecon Alarm
When moon detecon alarm is congured, once a moon event is detected, the device starts to
record and mulple linkage acons will be triggered.
Steps
1. Go to Conguraon → Event → Basic Event → Moon .
2. Select Channel No.
3. Check Enable
Moon Detecon.
4. Draw detecon area.
1) Click Draw Area.
2) In live view area, drag to draw the
detecon area.
3) Click Stop Drawing.
5. Set
Sensivity.
6. Congure arming schedule. For detailed steps, refer to "Congure Arming Schedule".
7.
Congure linkage method. For detailed steps, refer to "Congure Linkage Acons".
8. Click Save.
10.2
Congure Video Loss Alarm
When the recorder cannot receive video signal from the analog cameras, the video loss alarm will
be triggered. Linkage
acons, including audible warning and alarm output, can be set to respond.
Steps
1. Go to Conguraon → Event → Basic Event → Video Loss .
2. Select Channel No.
3. Check Enable Video Loss
Detecon.
4. Congure arming schedule. For detailed steps, refer to "Congure Arming Schedule".
5.
Congure linkage method. For detailed steps, refer to "Congure Linkage Acons".
6. Click Save.
10.3
Congure Video Tampering Alarm
A tampering alarm is triggered when the camera is covered and the monitoring area cannot be
viewed. Linkage
acons, including audible warning, alarm output, can be set to respond.
Steps
1. Go to Conguraon → Event → Basic Event → Video Tampering .
2. Select Channel No.
3. Check Enable Video Tampering.
Mobile Video Recorder User Manual
52