User Manual

Congure Driving Behavior Analysis
Set the driving behavior analysis parameters according to actual situaon to lower false detecon
rate.
Steps
1. Go to
Conguraon → VCA → Driving Behaviors → Driving Behaviors .
2. Select Channel No.
3. Check Enable.
4. Check behaviors to analyze and
congure their parameters.
Distracon Prompt Detecon
When the device detects that the driver is not concentrang on driving, the device will alarm
to prompt the driver.
Fague Driving (Closing Eyes) Detecon
When the device detects that the driver is too red to close his or her eyes, the device will
alarm.
Fague Driving (Yawn) Detecon
When the device detects that the driver is too red to yawn, the device will alarm.
Phone Call Detecon
When the device detects that the driver is using the mobile phone, the device will alarm.
Smoking Detecon
When the device detects that the driver is smoking, the device will alarm.
Seatbelt Unbuckled Detecon
When the device detects that the driver's seatbelt is not buckled, the device will alarm.
Driver Excepon Detecon
When the device detects that there are some excepons with the driver, the device will
alarm.
IR Interrupted Sunglasses Detecon
When the device detects that the driver is wearing IR interrupted sunglasses, the device will
alarm.
Alarm Triggering Time
Device will alarm when the corresponding driving behavior lasts for the set
me.
Condence
Available for phone call detecon and smoking detecon. The higher the value is, the lower
the false detecon rate. You are recommended to use the default value.
Stop Detecons in Low Speed
The feature is valid when GPS posioning succeeded. When the vehicle speed is lower than
the set value, all the driving behavior analysis will stop.
Mobile Video Recorder User Manual
39