User Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Safety Instruction
- Chapter 1 Product Introduction
- Chapter 2 Start up Device
- Chapter 3 Basic Operation
- Chapter 4 Network
- Chapter 5 Live View and Configuration
- Chapter 6 Mobile Device Features
- Chapter 7 Camera Management
- Chapter 8 Driving Behavior Analysis
- Chapter 9 Smart Configuration
- Chapter 10 Events and Alarms
- Chapter 11 Security
- Chapter 12 Maintenance
- 12.1 View System Information
- 12.2 Search Log File
- 12.3 Upgrade System
- 12.4 Configure Image Partition
- 12.5 Configure Overwritten Recording
- 12.6 Print Log
- 12.7 Enable IP Camera Plug and Play
- 12.8 Reboot
- 12.9 Restore Default Settings
- 12.10 Export Configuration File
- 12.11 Import Configuration File
- 12.12 Synchronize Time
- 12.13 Configure DST
- 12.14 Configure Local Output
- 12.15 Configure RS-232
- 12.16 Detect HDD
- 12.17 Configure Analog Camera
- Chapter 13 Local Menu Operation
- Appendix A. Communication Matrix and Device Command
Chapter 8 Driving Behavior Analysis
Driving behavior analysis is to analyze driver's behavior, including smoking, fague driving, phone
call, etc. The device will trigger warning when these behaviors are detected.
Note
Driving behavior analysis is only supported by some models. The actual device prevails.
8.1 Conguraon
8.1.1 Congure Smart Driving Behavior
One recorder supports analyzing the smart device driving behavior of one channel once.
Calibrate Camera
Posion
Calibrate network camera posion before enabling driving behavior detecon.
Before You Start
Add the network camera to your device.
Steps
1. Go to
Conguraon → VCA → Driving Behaviors → IPC Posion Calibraon .
2. Select Channel No.
3. Adjust the network camera
posion to make the driver face image appear in the red frame, and
the safety belt image appear above the yellow line.
Figure 8-1 Calibrate Camera Posion
Mobile Video Recorder User Manual
38