User Manual

Before You Start
The device supports embedded audio or peripheral audio device has been connected.
Steps
1. Go to
Conguraon → Video/Audio → Audio .
2. Select Intercom Audio Coding.
Note
The selected encoding format should be the same with that of the embedded audio or
peripheral audio device.
3. Click Save.
7.3
Congure Image Parameters
You can adjust the image parameters to get clear image.
Steps
1. Go to Conguraon → Image → Display Sengs .
2. Select Channel No.
3. Set image parameters.
Day/Night Switch
Auto-Switch
In auto mode, the day mode and night mode can switch
automacally according to the
light
condion of environment.
Scheduled Switch
In scheduled mode, you can set the me schedule for day/night/day and night. For
example, click Day and set the start and end me for the day mode. Then the me out of
the schedule is for the night mode.
Brightness
It refers to the max. brightness of the image.
Contrast
It refers to the contrast of the image. Set it to adjust the levels and permeability of the
image.
Saturaon
It refers to the colorfulness of the image color.
Sharpness
It refers to the edge contrast of the image.
Exposure Time
Mobile Video Recorder User Manual
35