User Manual

Chapter 7 Camera Management
7.1 Congure Encoding Parameters
Congure encoding parameters to adjust live view image and video parameters.
Go to Conguraon → Video/Audio → Video .
•
In good network
situaon, you can set high resoluon and bitrate to improve image quality.
• In bad network situaon, you can set low resoluon, bitrate, and frame rate to get uent image.
• In bad network
situaon, if you want to guarantee the resoluon, you can set low bitrate and
frame rate to get uent image.
Stream Type
Main Stream is used for HD storage and live view. Sub Stream is used for BD storage and live
view when the network bandwidth is
insucient.
Video Type
If you want to record both video and audio, select Video&Audio. If you just want to record
video, select Video Stream.
Resoluon
The higher the resoluon, the clearer the image, and the higher the requirement of network
bandwidth.
Bitrate Type
You can select Variable or Constant.
Video Quality
If the bitrate is variable, you can select video quality according to your needs. The higher the
video quality, the higher the requirement of network bandwidth.
Frame Rate
The higher the frame rate, the higher the requirement of network bandwidth, and the higher
the needed storage capacity.
Max. Bitrate
If the bitrate is variable, enter the max. bitrate. The bitrate will change
automacally below the
max. value.
Video Encoding
Select H.265 (only supported by some models) or H.264 according to the actual needs.
7.2
Congure Audio Parameters
You can congure the audio encoding format.
Mobile Video Recorder User Manual
34