User Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Safety Instruction
- Chapter 1 Product Introduction
- Chapter 2 Start up Device
- Chapter 3 Basic Operation
- Chapter 4 Network
- Chapter 5 Live View and Configuration
- Chapter 6 Mobile Device Features
- Chapter 7 Camera Management
- Chapter 8 Driving Behavior Analysis
- Chapter 9 Smart Configuration
- Chapter 10 Events and Alarms
- Chapter 11 Security
- Chapter 12 Maintenance
- 12.1 View System Information
- 12.2 Search Log File
- 12.3 Upgrade System
- 12.4 Configure Image Partition
- 12.5 Configure Overwritten Recording
- 12.6 Print Log
- 12.7 Enable IP Camera Plug and Play
- 12.8 Reboot
- 12.9 Restore Default Settings
- 12.10 Export Configuration File
- 12.11 Import Configuration File
- 12.12 Synchronize Time
- 12.13 Configure DST
- 12.14 Configure Local Output
- 12.15 Configure RS-232
- 12.16 Detect HDD
- 12.17 Configure Analog Camera
- Chapter 13 Local Menu Operation
- Appendix A. Communication Matrix and Device Command
6.5 Congure Sensor-In
Sensor-in detects and records the driving informaon of the vehicle, including pedal braking,
turning le/right, reversing, etc.
Before You Start
Connect the sensor-in interface to vehicle corresponding interface. For details, refer to Quick Start
Guide.
Steps
1. Go to
Conguraon → Vehicle → Sensor-In .
2. Check Enable.
Note
If sensor-in is disabled, you can congure it via alarm input. For example, for the recorder with
4-ch alarm inputs, according to the sequence of the parameters on the interface, braking
corresponds to No. 5 alarm input (A<-5), turning le corresponds to No. 6 alarm input (A<-6),
and so on. Refer to
"Congure Alarm Input" for details.
3. Select Trigger Level and Pop Channel according to actual situaon.
The image of selected channel will be displayed in full screen when sensor-in is triggered.
4. Click Save.
Mobile Video Recorder User Manual
33