User Manual

Note
• The
combinaon mode means the posioning module will be selected automacally. For
example, if GPS/BDS is selected, GPS or BDS will be selected automacally.
• The posioning module varies with models. The actual interface prevails.
5.
Oponal: Check Enable of Satellite Time Sync to synchronize the device me with satellite
me.
6.
Congure the speed limit.
1) Select Speed Units.
2) Enter Speed Limit of Alarm.
If the vehicle speed exceeds the set value, the device will alarm.
7. Enter Blind Replacement and GPS Upload Interval.
Blind Replacement
In the area without network signal,
aer the signal restores, the posioning informaon
from the start me without network signal to the current me will be uploaded. For
example, if you enter 3,
aer the network signal restores, the data from 3 days ago to now
will be uploaded.
GPS Upload Interval
The posioning informaon will be uploaded according to the set interval.
8. Check the channel(s) you want the posioning informaon to be displayed.
The
posioning informaon will be displayed in the live view and playback images of the
selected channel(s).
9.
Congure the linkage acons.
-
If you want the overspeed vehicle to trigger the speed alarm, check Trigger Alarm Output
and check the alarm output.
-
If you want the overspeed vehicle to trigger the device to beep, check Audible Warning.
10. Click Save.
11.
Oponal: Click Locaon Status to view the posioning informaon.
6.4
Congure G-Sensor Alarm
G-Sensor detects and records acceleraon informaon in 3-axial (X, Y, Z) direcons.
Before You Start
Connect a G-sensor to the device.
Steps
1. Go to Conguraon → Vehicle → G-Sensor .
Mobile Video Recorder User Manual
31