User Manual

Note
• Select
Baery or UPS according to the power supply mode. If you select OFF, low voltage
protecon is disabled.
• When the device power voltage is lower than the system threshold, the device will shut down
automacally, no maer what type of startup/shutdown mode you selected.
3. Select Auto Work Type as Halt Delay.
4. Select Delay Time.
5.
Click Save.
6.3 Congure Satellite Posioning
The built-in GNSS module supports GPS (Global Posioning System), enabling device posioning
and speed limit alarm.
Before You Start
Install the posioning antenna.
Steps
1. Go to
Conguraon → Vehicle → Posion Sengs .
2. Click Locaon Conguraon.
Figure 6-1 Congure Satellite Posioning
3. Select Posion Module.
Built-in
Obtain data from the satellite posioning module built in the device.
Intelligent Display Terminal
Obtain data from display terminal.
4. Select Locang Module.
Mobile Video Recorder User Manual
30