User Manual

Start the live view and click to display the live view image in full screen.
Press Esc to exit from the full-screen mode.
5.1.9 Channel-Zero
Channel-zero, known as virtual channel, can show the videos from all channels of the recorder,
reducing the bandwidth while simultaneously previewing from mulchannel.
Steps
1. Go to
Conguraon → Video/Audio → Channel-zero .
2. Check Enable Channel-zero Encoding.
3. Select Max. Bitrate and Max. Frame Rate.
4. Click Save.
5. Go to Live View.
6. Double click Channel-zero in the camera list to start live view of channel-zero.
5.2 PTZ
Operaon
Congure PTZ parameters and control PTZ.
5.2.1
Congure PTZ
Follow the steps to set PTZ parameters. The conguraon of the PTZ parameters should be done
before you control the PTZ camera.
Before You Start
Connect the RS-485 cables of the PTZ camera to EXT.DEV interface of the device.
Steps
1. Go to
Conguraon → System → System Sengs → Serial Conguraon .
2. Select COM as EXT.DEV.
3.
Congure parameters such as Baud Rate, Data Bit, etc.
Note
All the parameters should be exactly the same with those of the PTZ camera.
4. Click Save.
5.2.2 PTZ Control Panel
Go to Live View. Control PTZ camera via PTZ control panel.
Mobile Video Recorder User Manual
26