User Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Safety Instruction
- Chapter 1 Product Introduction
- Chapter 2 Start up Device
- Chapter 3 Basic Operation
- Chapter 4 Network
- Chapter 5 Live View and Configuration
- Chapter 6 Mobile Device Features
- Chapter 7 Camera Management
- Chapter 8 Driving Behavior Analysis
- Chapter 9 Smart Configuration
- Chapter 10 Events and Alarms
- Chapter 11 Security
- Chapter 12 Maintenance
- 12.1 View System Information
- 12.2 Search Log File
- 12.3 Upgrade System
- 12.4 Configure Image Partition
- 12.5 Configure Overwritten Recording
- 12.6 Print Log
- 12.7 Enable IP Camera Plug and Play
- 12.8 Reboot
- 12.9 Restore Default Settings
- 12.10 Export Configuration File
- 12.11 Import Configuration File
- 12.12 Synchronize Time
- 12.13 Configure DST
- 12.14 Configure Local Output
- 12.15 Configure RS-232
- 12.16 Detect HDD
- 12.17 Configure Analog Camera
- Chapter 13 Local Menu Operation
- Appendix A. Communication Matrix and Device Command
4.1.5 Congure DDNS
If the external network is a dynamic IP address, you can use the Dynamic Domain Name Server
(DDNS) for network access.
Before You Start
• Register your device on the DDNS server.
•
Congure local network IP address, subnet mask, gateway, and DNS server.
• Create port mapping.
Steps
1. Go to Conguraon → Network → Basic Sengs → DDNS .
Figure 4-3 Congure DDNS
2. Select DDNS Type.
3. Enter server informaon.
4. Click Save.
What to do next
Open the web browser and enter the server address to visit it.
4.2
Plaorm Connecon
4.2.1 Connect to ISUP Plaorm
ISUP (EHome) is a plaorm access protocol. The device can be remotely accessed via ISUP
plaorm.
Before You Start
• Create the device ID on ISUP plaorm.
• Ensure the device can communicate with the plaorm normally.
Mobile Video Recorder User Manual
19