User Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Safety Instruction
- Chapter 1 Product Introduction
- Chapter 2 Start up Device
- Chapter 3 Basic Operation
- Chapter 4 Network
- Chapter 5 Live View and Configuration
- Chapter 6 Mobile Device Features
- Chapter 7 Camera Management
- Chapter 8 Driving Behavior Analysis
- Chapter 9 Smart Configuration
- Chapter 10 Events and Alarms
- Chapter 11 Security
- Chapter 12 Maintenance
- 12.1 View System Information
- 12.2 Search Log File
- 12.3 Upgrade System
- 12.4 Configure Image Partition
- 12.5 Configure Overwritten Recording
- 12.6 Print Log
- 12.7 Enable IP Camera Plug and Play
- 12.8 Reboot
- 12.9 Restore Default Settings
- 12.10 Export Configuration File
- 12.11 Import Configuration File
- 12.12 Synchronize Time
- 12.13 Configure DST
- 12.14 Configure Local Output
- 12.15 Configure RS-232
- 12.16 Detect HDD
- 12.17 Configure Analog Camera
- Chapter 13 Local Menu Operation
- Appendix A. Communication Matrix and Device Command
Figure 4-2 Congure Local Network
3. Select LAN interface.
-
Select Debug Interface to debug the device.
-
Select Rear Interface to connect to IP cameras.
4. Enter IPv4 Address, IPv4 Subnet Mask, and IPv4 Default Gateway.
5. Oponal: To access the device via extranet, congure DNS server IP address.
6. Click Save.
4.1.4
Congure Port
Go to Conguraon → Network → Basic Sengs → Port to set the following parameters.
HTTP Port
To access the device via web browser.
RTSP Port
To get stream.
Server Port
To access the device via client
soware.
Mobile Video Recorder User Manual
18