User Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Safety Instruction
- Chapter 1 Product Introduction
- Chapter 2 Start up Device
- Chapter 3 Basic Operation
- Chapter 4 Network
- Chapter 5 Live View and Configuration
- Chapter 6 Mobile Device Features
- Chapter 7 Camera Management
- Chapter 8 Driving Behavior Analysis
- Chapter 9 Smart Configuration
- Chapter 10 Events and Alarms
- Chapter 11 Security
- Chapter 12 Maintenance
- 12.1 View System Information
- 12.2 Search Log File
- 12.3 Upgrade System
- 12.4 Configure Image Partition
- 12.5 Configure Overwritten Recording
- 12.6 Print Log
- 12.7 Enable IP Camera Plug and Play
- 12.8 Reboot
- 12.9 Restore Default Settings
- 12.10 Export Configuration File
- 12.11 Import Configuration File
- 12.12 Synchronize Time
- 12.13 Configure DST
- 12.14 Configure Local Output
- 12.15 Configure RS-232
- 12.16 Detect HDD
- 12.17 Configure Analog Camera
- Chapter 13 Local Menu Operation
- Appendix A. Communication Matrix and Device Command
Chapter 4 Network
4.1 Network Connecon
4.1.1 Dial
Set the dialing parameters if you want to connect the device to the network via dialing.
Before You Start
Install SIM card and connect 3G/4G antenna to your device.
Steps
1. Go to
Conguraon → Network → Basic Sengs → 3G/4G .
2. Check Enable.
3. Click Dial Parameters.
4. Select Network Mode.
Automac
The device will automacally switch to the strongest network.
Auto-Search and Auto-Switch
Network priority: 4G > 3G > 2G. The device will automacally connect network of high
priority.
3G
The device only connects 3G network.
4G
The device only connects 4G network.
5. Set dial parameters.
-
To connect the device to private network, enter Access Number, User Name, Password, and
APN.
-
To connect the device to general network, you do not need to set dial parameters.
Mobile Video Recorder User Manual
15