User Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Safety Instruction
- Chapter 1 Product Introduction
- Chapter 2 Start up Device
- Chapter 3 Basic Operation
- Chapter 4 Network
- Chapter 5 Live View and Configuration
- Chapter 6 Mobile Device Features
- Chapter 7 Camera Management
- Chapter 8 Driving Behavior Analysis
- Chapter 9 Smart Configuration
- Chapter 10 Events and Alarms
- Chapter 11 Security
- Chapter 12 Maintenance
- 12.1 View System Information
- 12.2 Search Log File
- 12.3 Upgrade System
- 12.4 Configure Image Partition
- 12.5 Configure Overwritten Recording
- 12.6 Print Log
- 12.7 Enable IP Camera Plug and Play
- 12.8 Reboot
- 12.9 Restore Default Settings
- 12.10 Export Configuration File
- 12.11 Import Configuration File
- 12.12 Synchronize Time
- 12.13 Configure DST
- 12.14 Configure Local Output
- 12.15 Configure RS-232
- 12.16 Detect HDD
- 12.17 Configure Analog Camera
- Chapter 13 Local Menu Operation
- Appendix A. Communication Matrix and Device Command
Before You Start
• Install and format the storage media.
•
Congure event parameters. Refer to "Events and Alarms" for details.
Steps
1. Go to
Conguraon → Storage → Schedule Sengs .
Figure 3-4 Congure Event Triggered Recording
2. Select Channel No.
3. Check Enable Record Plan.
4. Select recording type as Alarm, Moon, Moon | Alarm, or Moon & Alarm.
Moon | Alarm
Trigger recording when either moon detecon or alarm input is detected.
Alarm
Trigger recording when alarm input is detected.
Moon
Trigger recording when moon detecon is detected.
Moon & Alarm
Trigger recording when both moon detecon and alarm input are detected.
5. Oponal: Click Advanced to congure pre-record, post-record, and expired me.
Pre-record
The me you set to start recording before the scheduled me or the event. For example, if
an alarm triggers recording at 10:00, and the pre-record me is set as 5 seconds, the device
starts to record at 9:59:55.
Post-record
Mobile Video Recorder User Manual
10