User Manual

Steps
1. Go to
Conguraon → System → Camera Management → IP Camera .
2.
Oponal: If the device and the camera are in dierent network segments, modify IP camera
address.
1) Check the IP camera and click Modify.
2) Enter the required informaon.
3) Click OK.
3. Add IP camera.
-
For the camera with the same password of the device:
a. Check the camera.
b. Click Quickly Add to add it
automacally.
-
For the camera with dierent password of the device:
a. Click Add.
b. Enter IP camera informaon.
c. Click OK.
Figure 3-1 Add IP Camera
Note
• Select the protocol supported by the camera.
• If no protocol is supported, click Custom Protocol to
congure the main stream and sub-
stream. Then select the congured custom protocol to add the IP camera.
Result
The status of the successfully added camera is online.
3.1.3 Edit IP Camera
You can visit, edit, or delete the added IP cameras.
Mobile Video Recorder User Manual
6