User Manual

Go to Conguraon → System → Maintenance → Upgrade & Maintenance .
Restore
Restore all parameters, except the network (including IP address, subnet mask, gateway, MTU,
NIC working mode, default route, server port, etc.) and user account parameters, to the factory
default sengs.
Default
Restore all parameters to the factory default
sengs.
11.6 Export Conguraon File
The conguraon les of the recorder can be exported to your computer for backup.
Steps
1. Go to Conguraon → System → Maintenance → Upgrade & Maintenance .
2. Click Device Parameters and select the
conguraon le saving path.
11.7 Import
Conguraon File
The conguraon le of one device can be imported to mulple devices if they are to be
congured with the same parameters.
Steps
Cauon
Only devices of the same model can share conguraon le.
1. Go to Conguraon → System → Maintenance → Upgrade & Maintenance .
2. Click Browse of Import
Cong. File and select conguraon le.
3. Click Import and click OK in popup message box to start imporng.
11.8
Congure DST Sengs
Congure DST (Daylight Saving Time) sengs for the system.
Steps
1. Go to Conguraon → System → System Sengs → Time Sengs .
2. Check Enable DST.
3. Set Start Time and End Time for DST.
4. Select DST Bias.
5. Click Save.
Mobile Video Recorder User Manual
35