How to Guide

Title:
How to configure the G-sensor function of MVR
Version:
v1.0
Date:
8/8/2019
Product:
MVR
Page:
3 of 4
© Hangzhou Hikvision Digital Technology Co.,Ltd. All Rights Reserved.
No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China • Tel: [phone] • Fax: [phone]
E-Mail: [e-mail] • www.hikvision.com
How to configure the G-sensor function of MVR
1. Configuration for the DS-1530HMI
1) After the DS-1530HMI has been installed and connected to MVR, configure the RS-232
Parameters as following picture and enable Alarm Terminal (on web service or local menu)
Configuration on Webpage
Configuration on Local Menu
2. Calibration
1) Calibration is required after a DS-1530HMI is installed. Then reboot the MVR and press the