How to Guide

ManualsBrandsHikvision ManualsMobile Digital Video Recorders8-ch 1080p, H.265, 2 x HDD/SSD Mobile DVR

Title:

How to configure the G-sensor function of MVR

Version:

v1.0

Date:

8/8/2019

Product:

MVR

Page:

1 of 4

No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China • Tel: +86-571-8807-5998 • Fax: +1 909-595-0788

E-Mail: support@hikvision.com • www.hikvision.com

Preparation

1. What is a G-sensor?

1) The G-sensor is an “Acceleration-sensor”, which is used to detect the acceleration in X, Y, Z three

orthogonal coordinate axes, and it can trigger an alarm if the variation has exceeded the preset threshold.

The X, Y, Z Axes Acceleration

2) If the variation between Reference value and the Current value exceed the threshold value, there is a

alarm will be triggered;

Summary of content (4 pages)

PAGE 1
Title: Product: How to configure the G-sensor function of MVR MVR Version: v1.0 Date: Page: 8/8/2019 1 of 4 Preparation 1. What is a G-sensor? 1) The G-sensor is an “Acceleration-sensor”, which is used to detect the acceleration in X, Y, Z three orthogonal coordinate axes, and it can trigger an alarm if the variation has exceeded the preset threshold.
PAGE 2
Title: Product: How to configure the G-sensor function of MVR MVR Version: v1.0 Date: Page: 8/8/2019 2 of 4 3) Some MVR models have a built-in G-sensor, so they can works alone. While for MVR without a builtin G-sensor, it can realize the G-sensor function with the DS-1530HMI which has a built-in G-sensor; It is required that the MVR or DS-1530HMI should be installed on a horizontal flat surfaces and the position should be in accordance with the following picture suggested: 2.
PAGE 3
Title: Product: How to configure the G-sensor function of MVR MVR Version: v1.0 Date: Page: 8/8/2019 3 of 4 How to configure the G-sensor function of MVR 1. Configuration for the DS-1530HMI 1) After the DS-1530HMI has been installed and connected to MVR, configure the RS-232 Parameters as following picture and enable Alarm Terminal (on web service or local menu) Configuration on Webpage Configuration on Local Menu 2. Calibration 1) Calibration is required after a DS-1530HMI is installed.
PAGE 4
Title: Product: How to configure the G-sensor function of MVR MVR Version: v1.0 Date: Page: 8/8/2019 4 of 4 panic button simultaneously, when the power indicator of panic button flashes twice, which indicating the calibration is successfully set. First Choice for Security Professionals HIKVISION Technical Support © Hangzhou Hikvision Digital Technology Co.,Ltd. All Rights Reserved. No.