Quick Start Guide

Fixing posion
All the screws in the xing posions must be fastened ghtly to avoid device falling during the
vibraon in driving.
1.3 Install SIM Card
Pluggable 3G/4G wireless communicaon module is designed for the device. Install SIM card to
realize wireless communicaon.
Before You Start
Prepare SIM card and wrench.
Steps
Note
This secon is only applicable to the device supporng 3G/4G and Wi-Fi.
1. Wear anstac gloves.
2. Use wrench to unfasten and remove the two screws
xing the 3G/4G and Wi-Fi module.
3. Pull out the 3G/4G and Wi-Fi module.
Figure 1-2 Pull out Module
4.
Press the buon on SIM card slot and then pull the SIM card tray out.
5. Place the SIM card on SIM card tray with the metal side facing upwards.
6. Insert the SIM card tray back to SIM card slot.
7. Install the 3G/4G and Wi-Fi module back to the device and fasten the screws.
1.4 Install Antenna
Note
This secon is only applicable to the device supporng 3G/4G and Wi-Fi.
• Connect antennas to corresponding antenna interfaces.
Mobile Video Recorder Quick Start Guide
2