Quick Start Guide

Chapter 2 Device Wiring
2.1 Power Cord Wiring
Warning
• In order to ensure the safety of your automobile and device, a fuse is required for wiring of
automobile power and device power.
• Do not connect the power cord to the device before all the cables are connected.
2.1.1 Shutdown Delay
The device starts up when your automobile ignites and shuts down aer automobile is o.
Automobile ignion startup and shutdown are realized by posive pole ignion switch (providing
high level signal when the switch closes).
Ignion switch is connected to the posive pole of
automobile baeries.
Steps
Note
• The wire
connecon of the device varies with the automobile ignion models.
• Make sure the connecon of ignion switch is correct.
1. Connect DC IN + of the device to the posive pole of automobile baeries, jumping over the
switch of normal automobile power.
2. Connect DC IN - of the device to the
negave pole of automobile baeries.
3. Connect ACC of the device to the automobile ignion switch.
4. Place fuse into the fuse holder.
Figure 2-1 Power Cord
Mobile Video Recorder Quick Start Guide
5