User Manual
Table Of Contents
- Chapter1 Introduction
- Chapter 2 Startup and Shutdown
- Chapter 3 Basic Functions
- Chapter 4 Network Configuration
- Chapter 5 Camera Configuration
- Chapter 6 System Configuration
- 6.1 Set System Sound
- 6.2 Set Voice Prompt
- 6.3 Turn on/off LED
- 6.4 Set Auto-Lock Time
- 6.5 Set Language
- 6.6 Set IR Lights
- 6.7 Set Positioning
- 6.8 Set Satellite Time Synchronization
- 6.9 Set Quick Charging Mode
- 6.10 Set Overwriting
- 6.11 Set Password Verification
- 6.12 View Battery Information
- 6.13 View System Information
- Chapter 7 Body Camera Assistant
- Chapter 8 Troubleshooting
Body Camera User Manual
44
7.7.2 Synchronize Time
Purpose
You can synchronize device time with your custom time or network time.
Step 1 Click Device Configuration tab, and click Time Settings item in the left menu list.
Figure 7-26 Time Settings
Step 2 Select time synchronization type as Auto Time Synchrony or Manual Time Synchrony.
Auto Time Synchrony: If selected, Device Time and Time Zone are not configurable.
Assistant will synchronize the device time with your computer time.
Manual Time Synchrony: If selected, you can synchronize device time according to your
custom time.
Step 3 (Optional) If Manual Time Synchrony is selected, select Device Time and Time Zone
according to your needs.
Step 4 Click Save to save the settings.
7.7.3 Configure System Parameters
Purpose
You can configure parameters such as system volume, positioning, LED, auto-logout, IR light, etc.
Step 1 Click Device Configuration tab, and click System Settings item in the left menu list.
Figure 7-27 System Settings