User Manual
Table Of Contents
- Chapter1 Introduction
- Chapter 2 Startup and Shutdown
- Chapter 3 Basic Functions
- Chapter 4 Network Configuration
- Chapter 5 Camera Configuration
- Chapter 6 System Configuration
- 6.1 Set System Sound
- 6.2 Set Voice Prompt
- 6.3 Turn on/off LED
- 6.4 Set Auto-Lock Time
- 6.5 Set Language
- 6.6 Set IR Lights
- 6.7 Set Positioning
- 6.8 Set Satellite Time Synchronization
- 6.9 Set Quick Charging Mode
- 6.10 Set Overwriting
- 6.11 Set Password Verification
- 6.12 View Battery Information
- 6.13 View System Information
- Chapter 7 Body Camera Assistant
- Chapter 8 Troubleshooting
Body Camera User Manual
43
Figure 7-24 Platform Settings
Step 2 Check Enable to enable platform connection.
Step 3 Edit IP, Port, and Device ID.
IP: The IP address of platform server you want to connect.
Port: The port of platform. The default port of iVMS is 7660.
Device ID: When adding body camera via platform, the ID is needed. It is the unique
identification.
Step 4 Click Save to save the settings.
7.7 Configure Device
7.7.1 Configure Encoding Parameters
Purpose
You can set the parameters for video, including resolution, frame rate, bitrate, and so on.
Step 1 Click Device Configuration tab, and click Device Information item in the left menu.
Step 2 Select Video Res.@Frame Rate, Net Transfer Res.@Frame Rate, Bitrate, and Net Transfer
Bitrate from respective drop-down list.
Step 3 Click Save to save the settings.
Figure 7-25 Encoding Parameters