User Manual
Table Of Contents
- Chapter1 Introduction
- Chapter 2 Startup and Shutdown
- Chapter 3 Basic Functions
- Chapter 4 Network Configuration
- Chapter 5 Camera Configuration
- Chapter 6 System Configuration
- 6.1 Set System Sound
- 6.2 Set Voice Prompt
- 6.3 Turn on/off LED
- 6.4 Set Auto-Lock Time
- 6.5 Set Language
- 6.6 Set IR Lights
- 6.7 Set Positioning
- 6.8 Set Satellite Time Synchronization
- 6.9 Set Quick Charging Mode
- 6.10 Set Overwriting
- 6.11 Set Password Verification
- 6.12 View Battery Information
- 6.13 View System Information
- Chapter 7 Body Camera Assistant
- Chapter 8 Troubleshooting
Body Camera User Manual
42
You can connect to the Internet via 3G/4G public network.
Before you start
Install 3G/4G microSIM card. Refer to Quick Start Guide for details.
Step 1 Click Device Configuration tab, and click Network Settings item in the left menu.
Figure 7-23 Dial via 3G/4G MicroSIM Card
Step 2 Check Enable Dialing.
Step 3 Input APN Parameters including Name, Dial Number, User Name, Password, and MTU. And
select Identification Type.
Step 4 Click Save to save the settings.
If you enable 3G/4G and Wi-Fi at the same time, Wi-Fi is in priority. If you want to use
3G/4G, disable Wi-Fi first.
Dialing via 3G/4G microSIM card is only applicable to DS-MH2311/32G/GLE.
7.6.4 Set Platform
Purpose
You can log in to body camera via iVMS platform to monitor device, receive alarms, and so on.
Step 1 Click Device Configuration tab, and click Platform Settings item in the left menu list.