User Manual
Table Of Contents
- Chapter1 Introduction
- Chapter 2 Startup and Shutdown
- Chapter 3 Basic Functions
- Chapter 4 Network Configuration
- Chapter 5 Camera Configuration
- Chapter 6 System Configuration
- 6.1 Set System Sound
- 6.2 Set Voice Prompt
- 6.3 Turn on/off LED
- 6.4 Set Auto-Lock Time
- 6.5 Set Language
- 6.6 Set IR Lights
- 6.7 Set Positioning
- 6.8 Set Satellite Time Synchronization
- 6.9 Set Quick Charging Mode
- 6.10 Set Overwriting
- 6.11 Set Password Verification
- 6.12 View Battery Information
- 6.13 View System Information
- Chapter 7 Body Camera Assistant
- Chapter 8 Troubleshooting
Body Camera User Manual
26
Chapter 6 System Configuration
Go to Main Menu > System to configure parameters such as system volume, voice prompt, LED,
auto-lock, IR light, etc.
6.1 Set System Sound
Purpose
Turn on and turn off system sound. If it is on, when you press a button or alarm occurs, body
camera will send out a sound. It is on by default.
Step 1 Go to Main Menu > System.
Step 2 Tap
/ to position the cursor on System Volume. And tap to enter the menu.
Step 3 Tap
/ to select On or Off.
Step 4 Tap
to save the settings.
6.2 Set Voice Prompt
Purpose
You can enable or disable voide prompt when you record or tape.
Step 1 Go to Main Menu > System.
Step 2 Tap
/ to position the cursor on Voice Prompt. And tap to enter the menu.
Step 3 Tap
/ to select On or Off.
Step 4 Tap
to save the settings.
6.3 Turn on/off LED
Purpose
You can turn on or turn off the LEDs. If LEDs are on, they will be automatically turned on or off
according to the device status.
Step 1 Go to Main Menu > System.
Step 2 Tap / to position the cursor on LED. And tap to enter the menu.
Step 3 Tap
/ to select LED as On or Off.
Step 4 Tap
to save the settings.