User Manual
Table Of Contents
- Chapter1 Introduction
- Chapter 2 Startup and Shutdown
- Chapter 3 Basic Functions
- Chapter 4 Network Configuration
- Chapter 5 Camera Configuration
- Chapter 6 System Configuration
- 6.1 Set System Sound
- 6.2 Set Voice Prompt
- 6.3 Turn on/off LED
- 6.4 Set Auto-Lock Time
- 6.5 Set Language
- 6.6 Set IR Lights
- 6.7 Set Positioning
- 6.8 Set Satellite Time Synchronization
- 6.9 Set Quick Charging Mode
- 6.10 Set Overwriting
- 6.11 Set Password Verification
- 6.12 View Battery Information
- 6.13 View System Information
- Chapter 7 Body Camera Assistant
- Chapter 8 Troubleshooting
Body Camera User Manual
23
Figure 4-3 Dialing Information
If you enable 3G/4G and Wi-Fi at the same time, Wi-Fi is in priority. If you want to use
3G/4G, disable Wi-Fi first.
Dialing via 3G/4G microSIM card is only applicable to DS-MH2311/32G/GLE.
4.3 Connect to Platform
Purpose
You can connect the body camera to platform.
Before you start
Configure the platform parameters in Body Camera Assistant. Refer to Chapter 7.6.4 Set Platform
for details.
Step 1 Go to Main Menu > Network.
Step 2 Tap
/ to position the cursor on Platform Connection item. And press to enter the
menu.
Step 3 Tap / to select On.
Step 4 Tap
to save the settings.
Step 5 Reboot the body camera according to the prompt “Reboot device to take effect.”.
Step 6 (Optional) Go to Main Menu > Network > Platform Information to view the details.