User Manual
Table Of Contents
- Chapter1 Introduction
- Chapter 2 Startup and Shutdown
- Chapter 3 Basic Functions
- Chapter 4 Network Configuration
- Chapter 5 Camera Configuration
- Chapter 6 System Configuration
- 6.1 Set System Sound
- 6.2 Set Voice Prompt
- 6.3 Turn on/off LED
- 6.4 Set Auto-Lock Time
- 6.5 Set Language
- 6.6 Set IR Lights
- 6.7 Set Positioning
- 6.8 Set Satellite Time Synchronization
- 6.9 Set Quick Charging Mode
- 6.10 Set Overwriting
- 6.11 Set Password Verification
- 6.12 View Battery Information
- 6.13 View System Information
- Chapter 7 Body Camera Assistant
- Chapter 8 Troubleshooting
Body Camera User Manual
21
Chapter 4 Network Configuration
4.1 Connect to Wi-Fi
Purpose
You can access Internet by connecting to a Wi-Fi.
Before you start
Configure Wi-Fi parameters, including SSID and key, in Body Camera Assistant. Refer to Chapter
7.6.1 Connect to Dynamic Wi-Fi for details.
Step 1 Go to Main Menu > Network.
Step 2 Tap
/ to position the cursor on Wi-Fi item. And press to enter the menu.
Figure 4-1 Set Wi-Fi
Step 3 Tap
/ to select On.
Step 4 Tap
to save the settings.
Step 5 Reboot the body camera according to the prompt “Reboot device to take effect.”.
Step 6 (Optional) Go to Main Menu > Network > Wi-Fi Information to view the Wi-Fi Status, SSID,
and IP.