User Manual
Table Of Contents
- TABLE OF CONTENTS
- Chapter 1 Introduction
- Chapter 2 Startup
- Chapter 3 Basic Functions
- Chapter 4 Network Settings
- Chapter 5 Camera Settings
- Chapter 6 System Settings
- Chapter 7 Body Camera Assistant
- Chapter 8 Troubleshooting
Body Camera User Manual
25
Figure 6. 4 IR Light
3. Press / to position the cursor on OFF, ON, or AUTO.
OFF: By default, IR light is off. The status adapts to daylight period.
ON: In night period or dark environment, it is recommended to turn on IR light.
AUTO: Body camera automatically turns on/off IR light according to environment.
4. Press to save the settings.
6.5 Positioning Settings
Purpose:
Body camera has a built-in positioning module. By turning on positioning function, the device can obtain the
latitude, longitude, and speed information.
The function is only available to the models supporting positioning.
Before you start:
Ensure the body camera locates in a place the positioning signal exists.
Steps:
1. Enter System Settings interface.
2. Press / to position the cursor on Positioning item. And press to enter.
3. Press / to select positioning type as Off, GPS, BeiDou, or GPS + BeiDou.
4. Press to save the settings and reboot device to take effect the settings.
After device restarted, if positioning succeeded, the positioning icon in live view will turn from to .
Figure 6. 5 Positioning