User Manual

Body Camera User Manual
22
Chapter 5 Camera Settings
Purpose:
Set the parameters for video, including resolution, frame rate, bitrate, and so on.
Steps:
 To configure camera parameters on LCD menu, do following steps:
1. Enter Camera Settings interface.
Main Menu > Camera Settings
Figure 5. 1 Camera Settings
2. Press / to position the cursor on Video Resolution, Bitrate, Frame Rate, Pre-Record, Post-Record,
or other items. And press the button to enter corresponding menu.
 Pre-Record: The time you set to record before the start recording time. For example, when you start
recording at 10:00, if you set the pre-record time as 5 seconds, the camera records it at 9:59:55.
 Post-Record: The time you set to record after the stop recording time. For example, when you stop
recording ends at 11:00, if you set the post-record time as 5 seconds, it records till 11:00:05.
 Video Clip: Maximum size for every video. Video will be automatically recorded into a new clip once
reaches the size.
3. Press / to select target parameter.
4. Press to save the settings and go back to upper menu.
5. Optionally, if encoding type is changed, reboot body camera to take effect the new settings.
 To configure camera parameters on Body Camera Assistant.
For detailed steps, refer to 7.5.2 Encoding Parameters.