User Manual
Table Of Contents
- TABLE OF CONTENTS
- Chapter 1 Introduction
- Chapter 2 Startup
- Chapter 3 Basic Functions
- Chapter 4 Network Settings
- Chapter 5 Camera Settings
- Chapter 6 System Settings
- Chapter 7 Body Camera Assistant
- Chapter 8 Troubleshooting
Body Camera User Manual
17
1) Enter Camera Settings sub-menu.
2) Press / to position the cursor on Picture Quality. And click to enter Picture Quality
menu.
3) Press / to select picture quality. And click to save the settings.
2. Press at the left side of device to take a picture of current live view image.
Step 2 is invalid in playback, quick charging, USB communication interface. Exit the interfaces before
operation.
The picture is saved in memory in .jpg format and named by taking picture date and time.
You can play back the picture in playback menu or download and save it in computer local path. For
detailed steps of downloading pictures, you can refer to 7.7 Assistant File Saving Path.
3.4 Record and Capture
Purpose:
You can record the videos in crime scenes or other situations. And during the recording, you can capture.
Steps:
1. Enter live view mode.
2. Press to start recording. Then in live view turns to and the LED 1 starts flashing in red.
3. Optionally, during the recording process, you can press to capture current live view image.
4. Press again to stop recording. Then turns to .
The operation is invalid in playback, quick charging, USB communication interface. Exit the interfaces
before operation.
The video is saved in memory in .mp4 format and named by recording starting time.
The picture is saved in memory in .jpg format and is named by capturing date and time.
The captured picture’s resolution is the same as video resolution.
You can play back the video and picture in playback menu or download and save it in computer local path.
For detailed steps of downloading videos, you can refer to 7.7 Assistant File Saving Path.
3.5 Taping
Purpose:
You can tape audios in crime scenes or other situations.
Steps:
1. Enter live view mode.
2. Press to start taping. Then pops up in live view interface.
3. Press again to stop taping. Then disappears.