User Manual

Chapter 6 Alarm Sengs
6.1 Set Auto Alarm
The device will detect the storage capacity and baery automacally. When the storage capacity is
full or the baery is low, corresponding prompt will pop up on the live view page to send the auto
alarm. Back up the les and release the storage capacity in me when the storage capacity is full.
Charge the device in me when the device is in low power.
6.2 Set Manual Alarm
In emergency, hold the alarm buon on the device side to send the alarm signal to the connected
plaorm.
Note
Connect the device to the plaorm rst. Then the alarm signal can be sent.
Body Camera User Manual
16