Quick Start Guide

Figure 1-1 Appearance
Table 1-2 Appearance Descripon
No. Name Descripon
1 Lens For recording and capture.
2 IR lights
•
If you set IR as ON, the IR lights
will be enabled during
recording.
•
If you set IR as AUTO, the IR
lights will be enabled
automacally during recording
or remote live view when the
illuminaon is insucient.
3 LED light
Aer the device starts up, hold
taping buon to turn on LED
light for light supplement or
emergency illuminaon. Then
hold it again to turn o LED
light.
Note
If you turn on LED light while IR
funcon is enabled already, the
IR funcon will be disabled
forcedly. Aer you turn o LED
light, the IR funcon will
restore to be enabled.
4 Record
•
Aer the device starts up,
press it to start record. Then
press it again to stop record.
•
When the device is shut down,
hold it to start it up and start
recording.
2