Body Camera Quick Start Guide UD18396N
Legal Information About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the company website Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.
NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.
Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC compliance: Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements. This device complies with Industry Canada licence-exempt RSS standard(s).
Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Danger Indicates a hazardous situation which, if not avoided, will or could result in death or serious injury. Caution Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results. Note Provides additional information to emphasize or supplement important points of the main text.
Safety Instruction Laws and Regulations Use of the product must be in strict compliance with the local laws and regulations. Please shut down the device in prohibited area. Power Supply • Use of the product must be in strict compliance with the local electrical safety regulations. • Use the power adapter provided by qualified manufacturer. Refer to the product specification for detailed power requirements.
• DO NOT expose the device to extremely hot, cold, or humidity environments. For temperature and humidity requirements, see device specification. • The device can only be safely used in the region below 2000 meters above the sea level. Maintenance • If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power cable, and contact the service center. • If the device is abnormal, contact the store you purchased it or the nearest service center.
• The battery must be charged and discharged every three months if it is not used, and recharged to 60% to 70% power percentage to store. • The scrapped battery should be discarded in compliance with the local laws and regulations. If there are no corresponding laws or regulations, throw it in a hazardous trash can. • DO NOT pierce the battery or shorten the electrodes, or it may cause explosion or fire hazard. • DO NOT throw the battery in fire or water, or it may cause explosion.
1 Product Introduction 1.1 Introduction Body camera (hereinafter referred to as device) highly integrates with record, taping, capture, positioning, etc. It is embedded with positioning module with high sensitivity to locate the occurring position of events accurately. It can record the process and condition of events completely via record, taping, and capture. You can also tag the important data for future search.
Figure 1-1 Appearance Table 1-2 Appearance Description No. Name Description 1 Lens For recording and capture. •If you set IR as ON, the IR lights will be enabled during recording. 2 IR lights •If you set IR as AUTO, the IR lights will be enabled automatically during recording or remote live view when the illumination is insufficient. After the device starts up, hold taping button to turn on LED light for light supplement or emergency illumination. Then hold it again to turn off LED light.
No. Name Description 5 MIC For voice collection. 6 Laser light After the device starts up, hold the recording button to enable laser light which can point to the center of the image. Then hold it again to disable laser light. 7 Mini USB interface Open the plug to connect to and 3G/ data cable or insert 3G/4G SIM 4G SIM card. card slot plug 8 Tape After the device starts up, press it to start taping. Then press it again to stop taping.
No. Name Description In menu, configuration, and input mode, tap it to enter the sub-menu, and confirm the selection or entered content. 16 17 Alarm After the device starts up, hold it to send the alarm signal to the connected platform manually. 18 PTT After the device starts up, hold it to set the device as a MIC or loudspeaker to start two-way audio. During record, press it to set a tag for the current video. Then hold it to cancel the tag.
Steps 1. Parallel the sheet metal buckle of the shoulder clip with the shoulder clip slot on the front panel of the device, and insert the shoulder clip into the slot as the direction shown below. Figure 2-1 Install Shoulder Clip 2. Push the shoulder clip downward until it is installed firmly. 3. Optional: Hold the shoulder clip, and squeeze the spring strip outward. Slide the shoulder clip upward to uninstall it. Figure 2-2 Uninstall Shoulder Clip 2.
Figure 2-3 Install 3G/4G SIM Card 3. Close the card slot plug. 2.3 Charge When the device is in low battery, charge it in time. Steps 1. Open the mini USB interface plug on the side of the device. 2. Connect one end of the USB data cable to the device, and the other end to the charger to charge the device. 2.4 Install Body Camera Assistant Install Body Camera Assistant (hereinafter referred to as software) if you want to configure the device parameters, download files, etc. via the computer.
3.2 Storage The recorded video, taped audio, and captured picture will be stored in the device. 3.2.1 Record You can record video via the device. Steps 1. Press (recording button) to start record. • Press the recording button in the sleeping mode. The screen will not be woken up if the voice prompt is enabled, or the LED indicators are enabled, or voice prompt and LED indicators are enabled at the same time. If only LED indicators are enabled, LED 1 will flash in red in low frequency.
2. Optional: Select Playback on the main menu to view the captured pictures. 3.3 Playback You can play back video, audio, and picture via the device. Steps 1. Select Playback. 2. Select Video, Audio, or Picture. 3. Select the file to play or view from the file list. 4 FAQ 4.1 Why does the device fail to start up? Possible Reason The device is out of power. Solution Shut down the device and connect it to the charger to charge for at least 20 minutes. 4.
Possible Reason 3G/4G SIM card is fees owed. Solution Renew the card. Possible Reason The device is abnormal. Solution Reboot the device. 4.4 Why cannot the device be logged in to via Body Camera Assistant? Possible Reason The password is incorrect. Solution Reset your password. Possible Reason The device is abnormal. Solution Reboot the device.
