Helmet Camera Quick Start Guide Scan the QR code for Portable Device Assistant application.
Helmet Camera Quick Start Guide Quick Start Guide COPYRIGHT © 2019 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”).
Helmet Camera Quick Start Guide Regulatory information FCC information FCC compliance: Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Helmet Camera Quick Start Guide 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info.
Helmet Camera Quick Start Guide Safety Instruction ● ● ● ● ● ● Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region. Please refer to technical specifications for detailed information.
Helmet Camera Quick Start Guide Symbol Description Provides additional information to emphasize or supplement important points of the main text. Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results. Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury.
Helmet Camera Quick Start Guide TABLE OF CONTENTS Chapter 1 Overview............................................................................................. 7 1.1 Appearance .............................................................................................. 7 1.2 Internal LCD Description ........................................................................... 8 Chapter 2 Installation ........................................................................................ 10 2.
Helmet Camera Quick Start Guide Chapter 1 Overview 1.1 Appearance The appearance of helmet camera is shown as Figure 1-1. Figure 1-1 Helmet Camera Appearance Refer to Table 1-1 for the description of helmet camera appearance. Table 1-1 Description of Helmet Camera Appearance No. Name Description 1 LED light button/Wi-Fi AP button Press it to turn on LED lights. Then press it to turn off LED lights. Hold it to enable/disable Wi-Fi AP.
Helmet Camera Quick Start Guide No. Name Description button/Internal LCD on/off button After the device starts up, hold it for 3 seconds to shut it down, and the device stops recording. After the device starts up and is ready, press it to capture a picture. After the device starts up, press it twice continuously to turn off/on the internal LCD. Solid red: Device is being charged after it is shut down. Device is being charged after it starts up and quick charging mode is enabled.
Helmet Camera Quick Start Guide Figure 1-2 Internal LCD Refer to Table 1-2 for icon description. Table 1-2 Internal LCD Icon Description Icon Description Overwritten record is enabled./Overwritten record is disabled. / / / / / / / / The rest recordable time duration supported by the current storage capacity./MicroSD card exception. / The current battery power status and the rest power percentage/The device is being charged via power adapter./The device is fully charged via power adapter.
Helmet Camera Quick Start Guide Chapter 2 Installation 2.1 Change Battery The device leaves factory with a battery. When the power is low, charge the device or change battery in time. Power off the device before changing battery. Before you start: Prepare a dedicated battery. Step 1 Press the battery cover buckle according to the direction shown in Figure 2-1, and lift the cover to uninstall it. Figure 2-1 Uninstall Battery Cover Step 2 Push the battery buckles aside, and take the former battery out.
Helmet Camera Quick Start Guide Figure 2-2 Install Battery Step 4 Install the battery cover back. Figure 2-3 Install Battery Cover 2.2 Install SIM Card and SD Card You can install Micro SIM card for network connection and install MicroSD card for storage. Power off the device before installing Micro SIM card and MicroSD card. Before you start: Prepare Micro SIM card and MicroSD card. Step 1 Uninstall battery cover. Refer to step 1 of 2.1 Change Battery.
Helmet Camera Quick Start Guide Step 2 Take the battery out. Step 3 Unlock the card sockets according to the tips on the printing. Figure 2-4 Open Card Socket Step 4 Place the Micro SIM card and MicroSD card according to the gap direction. Figure 2-5 Place Cards Step 5 Lock the card sockets according to the tips on the printing.
Helmet Camera Quick Start Guide Figure 2-6 Lock Card Socket Step 6 Install the battery back. Refer to step 2 of 2.1 Change Battery. Step 7 Install the battery cover back. Refer to step 3 of 2.1 Change Battery. 2.3 Install Device to Helmet The device is equipped with two hook fasteners and two loop fasteners for helmet installation. Two fasteners have been stuck on the bottom of the device after leaving factory.
Helmet Camera Quick Start Guide Chapter 3 Basic Operation 3.1 Startup and Shutdown Startup: Hold the On/Off button for 3 seconds until the indicator displays red. Then the device vibrates for 1 second, indicating the device has started up. Shutdown: Hold the On/Off button for 3 seconds until the indicator changes to green. Then the device vibrates twice with each vibration lasting for 0.5 second, indicating the device is shut down. Vibration is enabled by default.
Helmet Camera Quick Start Guide After record starts, if you connect the device to PC via USB cable, or enable quick charging mode, record will stop. 3.5 Capture Manual capture: Press the capture button, and the device vibrates for 0.1 second, indicating capturing succeeded. Timed capture: Set timed capture via the Portable Device Assistant application. Refer to the application user manual for details.
Helmet Camera Quick Start Guide Chapter 4 Portable Device Assistant Connection The helmet camera has been activated after leaving factory. You can enable Wi-Fi AP of the device. After connecting the mobile terminal to the Wi-Fi AP, you can preview the record and set the device via the Portable Device Assistant application installed on the mobile terminal. Before you start: Install Portable Device Assistant on mobile terminal.
Helmet Camera Quick Start Guide Step 5 Enter User Name and Password. Tap . Figure 4-1 Add Device The device default user name is admin, and the default password is 123456. Change the device password in time. You can change it via Portable Device Assistant. Refer to the application user manual for details.
Helmet Camera Quick Start Guide Figure 4-2 Device Information Step 3 Tap Configure This Device. Result: After selecting the helmet camera as the set device, you can tap Start Live View to start live view. You can tap and select Device Maintenance to set the device. Refer to the application user manual for details.
Helmet Camera Quick Start Guide 19 UD15436B
