User Manual

Mobile Digital Video Recorder User Manual
61
Step 1 Go to Menu > Basic Settings > G-Sensor.
Figure 12-10 G-Sensor Settings
Step 2 Select you G-sensor mode under Module:
 RS-232: The G-sensor is connected to the mobile DVR through RS-232 interface.
 Built-in: The G-sensor is built in the mobile DVR.
Step 3 Set the limit value for acceleration alarm in X, Y and Z directions.
X, Y and Z represent the direction of acceleration and the unit of alarm value is G (G=9.8
m/s
2
).
Step 4 Set the linkage actions for acceleration alarm, including Audible Warning and Alarm
Output.
Step 5 Click OK.
Step 6 Optionally, go to Menu > Status > G-sensor to view the G-sensor status.
12.11 Configure Arming Schedule and Linkage Actions
Step 1 Click Handle to set the arming schedule and alarm linkage actions.
Step 2 Select the day from Arming Schedule dropdown list.
Step 3 Set the arming period for selected day.
Step 4 (Optional) Copy the current settings to other days in the week.
Step 5 Check to enable linkage actions.
 Full Screen Monitoring
When an alarm is triggered, the local monitor displays the video image from the alarming
channel configured for full screen monitoring.
 Audible Warning