User Manual

Mobile Digital Video Recorder User Manual
60
The built-in GNSS module supports GPS (Global Positioning System), enabling device
positioning and speed limit alarm.
Step 1 Go to Menu > Basic Settings > Position.
Figure 12-9 Position
Step 2 Select Positioning Module.
 RS-232: Obtain data from the satellite positioning module connected through RS-232
interface.
 RS-485: Obtain data from the satellite positioning module connected through RS-485
interface.
 Built-in: Obtain data from the satellite positioning module built in the mobile DVR.
 Display Terminal: Obtain data from display terminal.
Step 3 Check Satellite Time Adjusting and select your time zone.
Step 4 Select Speed Unit and input Speed Limit.
Step 5 Set the linkage action for speeding alarm, including Audible Warning and Alarm
Output.
Step 6 Click Set of Display Channel and select display channels. The device positioning
information will be displayed on the selected channels.
Step 7 Click OK.
Step 8 Optionally, go to Menu > Status > Position to view positioning status.
12.10 Configure G-Sensor Alarm
Purpose:
G-Sensor detects and records acceleration information in 3-axial (X, Y, Z) directions.
Before you start:
Connect an external sensor to the device for obtaining and providing the acceleration speed
in 3-axial directions.