User Manual

Mobile Digital Video Recorder User Manual
54
Chapter 12 Events and Alarms
12.1 Configure Motion Detection Alarm
Purpose:
When motion detection alarm is configured, once a motion event is detected, the device
starts to record and multiple linkage actions will be triggered.
Step 1 Go to Menu > Other Settings > Camera.
Step 2 Click Set of More Setting.
Figure 12-1 Motion Detection Settings
Step 3 Check Motion Detection to enable the function.
Step 4 Set the area for motion detection. For detailed steps, refer to 12.12 Configure
Detection Area.
Step 5 Set the arming schedule and alarm linkage actions. For detailed steps, refer to 12.11
Configure Arming Schedule and Linkage Actions.
Step 6 Click OK.
12.2 Configure Alarm Input
Purpose:
Configure the settings for alarm input, including trigger level, arming schedule and alarm
linkage actions, etc.
Step 1 Go to Menu > Other Settings > Alarm In.