User Manual

Mobile Digital Video Recorder User Manual
50
Chapter 10 Platform
10.1 Ehome
Purpose:
The device can be remotely accessed via Ehome platform.
Before you start:
Create the device ID on the Ehome platform.
Step 1 Go to Menu > Basic Settings > Platform.
Figure 10-1 Platform Settings
Step 2 Check Platform Enable.
Step 3 Select Platform as Ehome.
Step 4 Configure the following parameters.
 Server IP: Enter the static IP address of iVMS server.
 Port No.: The default value is 7660.
 Device Register ID: The ID of the device registered on the Ehome platform. If you leave it
empty, device logs in to the platform with serial No.
Step 5 Click OK and reboot the device to activate the new settings.
Step 6 Optionally, go to Menu > Status > Platform to view the platform status.
10.2 Guarding Vision
Purpose:
The device can be remotely accessed via guarding vision platform.
Before you start: