User Manual
Table Of Contents
- Chapter 1 Panel Introduction
- Chapter 2 Installation and Connections
- Chapter 3 Start Up Device
- Chapter 4 Network
- Chapter 5 IP Camera
- Chapter 6 Camera Management
- Chapter 7 Live View
- Chapter 8 Storage
- Chapter 9 Playback
- Chapter 10 Platform
- Chapter 11 Backup
- Chapter 12 Events and Alarms
- 12.1 Configure Motion Detection Alarm
- 12.2 Configure Alarm Input
- 12.3 Configure Alarm Output
- 12.4 Configure Alarm Terminal
- 12.5 Configure Video Loss Alarm
- 12.6 Configure Video Tampering Alarm
- 12.7 Configure Video Quality Diagnostics
- 12.8 Configure Exception Alarm
- 12.9 Configure Satellite Positioning
- 12.10 Configure G-Sensor Alarm
- 12.11 Configure Arming Schedule and Linkage Actions
- 12.12 Configure Detection Area
- Chapter 13 User Account Management
- Chapter 14 General System Configuration
- Chapter 15 Maintenance
- Chapter 16 Shut Down Device
- Chapter 17 Appendix
Mobile Digital Video Recorder User Manual
9
1.2 Rear Panel
Figure 1-2 Rear Panel
Table 1-2 Interface Descrption
Flashing green: Dialing up succeeded.
ALM
Alarm indicator
Red: Alarm occurs.
5
SD card slot
Slot for SD card.
6
Dummy HDD
Two HDDs can be installed.
No.
Name
Description
1
CH1 to CH4
4 video inputs.
2
RS-232-1
For debugging.
3
RS-232-2
For connecting external devices.
4
USB interface
USB interface of 5-pin aviation plug.
5
Power
6-pin aviation plug for power supply.
6
VGA
VGA video output interface.
7
GNSS antenna
GNSS antenna interface.
8
EXT.DEV
RS-422 communication interface, two-way audio interface,
and CVBS video output.
9
Network
interface
10M/100M RJ45 Ethernet interface.
10
M-ANT
Main antenna interface of 3G/4G dialing.