Quick Start Guide

Video Intercom Door Station·Quick Start Guide
21
 When the video intercom between you and the resident is realized, you can speak to
the resident, and the live view of door station will be displayed on the connected
indoor station.
 When live view of door station is displayed on other devices or door station is calling
resident, the door station will detect the brightness of video. When the brightness is
lower than the expected threshold, the supplement light will be enabled.
 When the supplement light is enabled, the backlight of key will be auto-enabled,
otherwise, the door station will detect the brightness of live view and enable the
backlight of key when the brightness of live view is lower than expected threshold.
6.2 Issuing Card
Purpose:
You can assign the card to the door station or doorphone by issuing cards. You can issue
cards by swiping the main card with the door station, or issue the card with iVMS-4200
client software. For more information about issuing card by iVMS-4200, please refer to
the user manual in the disk.
Steps:
1. Swipe the main card on the card induction area to enter the card issuing mode.
2. Hear a voice prompt of the device: Issuing card started.
3. Swipe the unauthorized sub card in turn on the card induction area.
4. Hear a voice prompt of the device (Issuing card finished.) after issuing each card
successfully.
 Only Mifare card supported, and Mifare card with non-standard shape is
recommended.
 No more than 256 cards can be issued to and managed by V series door station. A
voice prompt (Card amount exceeds limit.) can be heard when the issued card amount
exceeds the upper limit.
 Swipe the main card again or perform no operation for more than 10s, the device will
exit the card issuing mode automatically.
 After issuing cards with client software, the local card issuing function will be
disabled.
 For each main door station, at most 8 sub door stations can be added.