Operation Manual

Video Intercom Door Station·User Manual
31
Call Button
1. Click the Call Buttons button to enter the calling buttons settings interface.
Figure 7-27 Call Buttons Interface
2. Select the button number.
3. Enter the floor No. and the room No..
4. Click the Save button to enable the settings.
 For DS-KV8102-IM, DS-KV8102-IP, and DS-KV8102-VP, there is no need setting the
Room No..
 If enabling Quick Press for Calling Center, you should call resident by holding down
the call button, and call center by quickly pressing the call button.
7.4.3 Network
Local Network Configuration
Steps:
1. Click the Local Network Configuration button to enter local network configuration
interface.
Figure 7-28 Local Network Parameters
2. Enter the local IP address, subnet mask, gateway address, and port No..
3. Click the Save button to enable the settings.
 The default port No. is 8000.