Operation Manual
Video Intercom Door Station·User Manual
29
Figure 7-24 Access Control and Elevator Configuration
2. Set corresponding parameters on the access control and elevator settings interface.
Access Control
1) Select the door No.
2) Set the door-unlocked duration.
3) (Optional) Enable the function of Delay Door Alarm.
4) Click the Save button to enable the settings.
Enabling Card Encrypt, the door station can recognize the encrypted information
of the card when you swiping the card on the door station.
Elevator Control
1) Select the elevator No., interface, RS485 protocol.
2) Select Yes/No of the elevator linkage.
3) Enter the server IP address and server port No..
3. Click the Save button to enable the settings.
This function only applies to door stations, except for the doorphone.