User Manual

Note
•
Reboong the indoor staon is required when you switch the SIP protocol
between the private SIP protocol and the standard SIP protocol.
•
All linked device IP should be congured again aer you change the SIP protocol
type.
•
The indoor extension does not support SIP sever
sengs.
1.2.3 Set Linked Device IP
Linked network parameters refers to the network parameters of devices (like door
staon, doorphone, master staon, center, etc.), to which the indoor staon is
linked. Linked devices for the indoor staon refers to door staon, center, master
staon, and doorphone.
With the private SIP protocol, intercom can be realized only when all these devices
are in the same network segment with the indoor staon.
With the standard SIP protocol, intercom can be realized when all these devices
support the standard SIP protocol.
Steps
Note
•
The doorphone does not support adding with the standard SIP protocol.
•
Here take door staon network sengs as example.
1.
Tap Sengs → → Conguraon → to enter the device management page.
Note
Default admin password is the acvaon password.
Network Indoor Staon Conguraon Guide
3