User Manual

Two ways are available for you to set IP address: DHCP, and set IP address manually.
1.
Tap Sengs → → Conguraon → to enter the network sengs page.
Note
Enter acvate password as the admin password.
Figure 1-2 Network Sengs
2.
Enable DHCP, then the indoor staon can search and get an IP address
automacally.
Note
Skip the following steps if you have enabled DHCP.
3.
Set the IP address manually.
1.2.2 Set SIP Server
A SIP server connecon is required and necessary for the indoor staon to guarantee
the connecon between the indoor staon and the management center (master
staon) in the same video intercom system. 2 types of SIP protocol are available for
the indoor
staon: Private Protocol, and Standard Protocol.
Network Indoor
Staon Conguraon Guide
2