User Manual

Figure 2-19 Local Network Conguraon
2.
Enter the local IP address, subnet mask, gateway address, and port No.
3.
Click Save to enable the sengs.
Note
•
The default port No. is 8000.
•
Aer eding the local network parameters of device, you should add the
devices to the device list again.
Linked Devices Network Conguraon
In the linked devices network conguraon page, you can congure the network
parameters of master staons, SIP servers and management centers of the same
LAN. The devices can be linked to the door staon and realize the linkage between
these devices.
Steps
1.
Click Linked Network Conguraon to enter linked network conguraon page.
Network Indoor
Staon Conguraon Guide
33