User Manual

Figure 1-10 Sync Time
2.
Enable Enable NTP.
3.
Set the synchronizing interval, enter the IP address/domain of NTP server and
port No., and select the me zone.
Note
The default unit of synchronizing interval is minute.
1.5 Sound Sengs
You can set the ringtone, ring duraon, call forwarding me, volume of microphone
and loudspeaker, enable/disable touch sound and auto-answer funcon on call
sengs page.
Steps
1.
Tap Sengs → to enter the call sengs page.
Network Indoor
Staon Conguraon Guide
11