User Manual

Figure 1-9 Arming Mode Sengs
3.
Arm the selected zone.
Note
•
Zones are congurable on the arming mode page.
•
24H alarm zone including smoke detector zone and gas detector zone will be
triggered even if they are disabled.
•
Arming mode sengs should be congured with the sengs of arming
status on the user page of the device.
1.3 Password Sengs
You can edit the admin password (acvaon password), duress code, unlock
password and arm/disarm password of the indoor staon.
You can edit the admin password (acvaon password) and arm/disarm password of
the indoor extension.
Steps
1.
Tap
Sengs → → Password to enter the password sengs page.
2.
Tap Admin, Unlock, Arm/Disarm, or Duress Code to pop up the password
sengs dialog box.
Admin
The admin password is required. The admin password is used to congure
parameters.
Default admin password is the
acvaon password.
Network Indoor
Staon Conguraon Guide
9